pnp -500ma -12v low frequency amplifier transistors l outline l features 1) a collecotr current is large.general purpose. 2) collector saturation voltage is low. v ce(sat) ? 250mv at i c = - 200ma, i b = - 10ma 3) complementary npn types : 2sc5663 (vmt3) / 2sc5585 (emt3) 4) lead free/rohs compliant. l inner circuit l applications switching circuit, muting circuit l packaging specifications 2sA2030 / 2sa2018 / 2sa2119k tape width (mm) 2sa2119k smt3 2928 t146 180 8 2sa2018 emt3 1616 tl 180 8 part no. package 3,000 bw basic ordering unit (pcs) marking 3,000 bw 8 8,000 bw vmt3 emt3 v ceo - 12v package size (mm) taping code reel size (mm) i c - 500ma parameter value smt3 2sA2030 vmt3 1212 t2l 180 2sA2030 (sc - 105aa) 2sa2018 sot - 416 (sc - 75a) 2sa2119k sot - 346 (sc - 59) collector base emitter collector base emitter collector base emitter base emitter collector 1/8 2013.05 - rev.d datasheet www.rohm.com ? 2013 rohm co., ltd. all rights reserved. http://
2sA2030 / 2sa2018 / 2sa2119k l absolute maximum ratings (ta = 25c) collector-base voltage collector-emitter voltage emitter-base voltage junction temperature range of storage temperature l electrical characteristics (ta = 25 ? c) *1 p w =10ms single pulse *2 each terminal mounted on a reference footprint mhz output capacitance c ob v cb = - 10v, i e = 0ma f = 1mhz - 6.5 - pf transition frequency f t v ce = - 2v, i e = 10ma f=100mh z - 260 v dc current gain h fe v ce = - 2v, i c = - 10ma 270 - 680 - collector-emitter saturation voltage v ce(sat) i c = - 200ma, i b = - 10ma - - 100 na emitter cut-off current i ebo v eb = - 6v - - - 100 na collector cut-off current i cbo v cb = - 15v - - c t stg - 55 to + 150 c - v emitter-base breakdown voltage bv ebo i e = - 10 m a - 6 - - v collector-base breakdown voltage bv cbo i c = - 10 m a - 15 - unit collector-emitter breakdown voltage bv ceo i c = - 1ma v parameter v ebo - 6 v power dissipation p d *2 collector current i c - 500 2sA2030 2sa2018 150 200 mw mw ma i cp *1 - 1 a 2sa2119k parameter symbol values unit v cbo - 15 v v ceo - 12 v symbol t j 150 max. - 100 - 250 - - 12 - - conditions min. typ. 2/8 2013.05 - rev.d www.rohm.com ? 2013 rohm co., ltd. all rights reserved. data sheet http://
2sA2030 / 2sa2018 / 2sa2119k l electrical characteristic curves (ta = 25c) 1 10 100 1000 - 1 - 10 - 100 - 1000 - 2 - 5 - 20 - 50 - 200 - 500 - 1 - 10 - 100 - 1000 ta=25oc v ce = - 5v - 2v - 1v 2 5 20 50 200 500 1 10 100 1000 fig.1 ground emitter propagation characteristics collector current : i c [ma] base to emitter voltage : v be [v] fig.2 typical output characteristics collector current : i c [ma] colector to emitte voltage : v ce [v] fig.3 dc current gain vs. collector current (i) dc current gain : h fe collector current : i c [ma] fig.4 dc current gain vs. collector current (ii) dc current gain : h fe collector current : i c [ma] 3/8 2013.05 - rev.d www.rohm.com ? 2013 rohm co., ltd. all rights reserved. data sheet http://
2sA2030 / 2sa2018 / 2sa2119k l electrical characteristic curves (ta = 25c) fig.5 collector - emitter saturation voltage vs. collector current (i) collector - emitter saturation voltage : v ce(sat) [mv] collector current : i c [ma] fig.6 collector - emitter saturation voltage vs. collector current (ii) collector - emitter saturation voltage : v ce(sat) [mv] collector current : i c [ma] fig.7 base - emitter saturation voltage vs. collector current base - emitter m saturation voltage : v be(sat) [mv] collector current : i c [ma] fig.8 gain bandwidth product vs. emitter current transition frequency : f t [mhz] emitter current :i e [ma] 4/8 2013.05 - rev.d www.rohm.com ? 2013 rohm co., ltd. all rights reserved. data sheet http://
2sA2030 / 2sa2018 / 2sa2119k l electrical characteristic curves (ta = 25c) -0.001 -0.01 -0.1 -1 -10 -0.01 -0.1 -1 -10 -100 ta=25oc single non repetitive pulse 2sa2119k 1ms 10ms dc ( mounted on a reference land) 100ms -0.001 -0.01 -0.1 -1 -10 -0.01 -0.1 -1 -10 -100 ta=25oc single non repetitive pulse 2sA2030 dc ( mounted on a reference land) 10ms 1ms 100ms -0.001 -0.01 -0.1 -1 -10 -0.01 -0.1 -1 -10 -100 ta=25oc single non repetitive pulse dc ( mounted on a reference land) 100ms 2sa2018 10ms 1ms fig.9 emitter input capacitance vs. emitter - base voltage collector output capacitance vs. collector - base voltage collector output capacitance : cob [pf] emitter input capacitance : cib [pf] collector - base voltage : v cb [v] emitter - base voltage : v eb [v] fig.10 safe operating area collector current : i c [a] collector to emitter voltage : v ce [ v] fig.11 safe operating area collector current : i c [a] collector to emitter voltage : v ce [v] fig.12 safe operating area collector current : i c [a] collector to emitter voltage : v ce [v] 5/8 2013.05 - rev.d www.rohm.com ? 2013 rohm co., ltd. all rights reserved. data sheet http://
2sA2030 / 2sa2018 / 2sa2119k l dimensions (unit : mm) dimension in mm / inches vmt3 e pattern of terminal position areas [not a recommended pattern of soldering pads] 6/8 2013.05 - rev.d www.rohm.com ? 2013 rohm co., ltd. all rights reserved. data sheet min max min max a 0.45 0.55 0.018 0.022 a1 0.00 0.10 0.000 0.004 b 0.17 0.27 0.007 0.011 b1 0.27 0.37 0.011 0.015 c 0.08 0.18 0.003 0.007 d 1.10 1.30 0.043 0.051 e 0.70 0.90 0.028 0.035 e h e 1.10 1.30 0.043 0.051 l 0.10 0.30 0.004 0.012 lp 0.20 0.40 0.008 0.016 x - 0.10 - 0.004 min max min max b2 - 0.37 - 0.015 b3 - 0.47 - 0.019 e1 l1 - 0.50 - 0.020 dim milimeters inches 0.80 0.031 dim milimeters inches 0.40 0.02 b1 d e b e h x s a a c l lp a1 a s e1 l1 b2 b3 l1 e http://
2sA2030 / 2sa2018 / 2sa2119k l dimensions (unit : mm) dimension in mm / inches emt3 pattern of terminal position areas [not a recommended pattern of soldering pads] 7/8 2013.05 - rev.d www.rohm.com ? 2013 rohm co., ltd. all rights reserved. data sheet b1 d e b e h e x s a a c q a3 l1 lp a1 a s e1 l1 l1 b3 e b2 min max min max a 0.60 0.80 0.024 0.031 a1 0.00 0.10 0.000 0.004 a3 b 0.15 0.30 0.006 0.012 b1 0.25 0.40 0.010 0.016 c 0.10 0.20 0.004 0.008 d 1.50 1.70 0.059 0.067 e 0.70 0.90 0.028 0.035 e h e 1.40 1.80 0.055 0.071 l1 0.10 - 0.004 - lp 0.15 - 0.006 - q 0.05 0.25 0.002 0.010 x - 0.10 - 0.004 min max min max b2 - 0.40 - 0.016 b3 - 0.50 - 0.020 e1 l1 - 0.70 - 0.028 1.10 0.043 dim milimeters inches 0.25 0.010 0.50 0.020 dim milimeters inches http://
2sA2030 / 2sa2018 / 2sa2119k l dimensions (unit : mm) dimension in mm / inches smt3 pattern of terminal position areas [not a recommended pattern of soldering pads] 8/8 2013.05 - rev.d www.rohm.com ? 2013 rohm co., ltd. all rights reserved. data sheet e d e b x s a a c q a3 l1 lp a1 a s e h b2 l1 e e1 min max min max a 1.00 1.30 0.039 0.051 a1 0.00 0.10 0.000 0.004 a3 b 0.35 0.50 0.014 0.020 c 0.09 0.25 0.004 0.010 d 2.80 3.00 0.110 0.118 e 1.50 1.80 0.059 0.071 e h e 2.60 3.00 0.102 0.118 l1 0.30 0.60 0.012 0.024 lp 0.40 0.70 0.016 0.028 q 0.20 0.30 0.008 0.012 x - 0.10 - 0.004 y - 0.10 - 0.004 min max min max b2 - 0.60 - 0.024 e1 l1 - 0.90 - 0.035 2.10 0.083 dim milimeters inches 0.25 0.010 0.95 0.037 dim milimeters inches http://
r1102 a www.rohm.com ? 2013 rohm co., ltd. all rights reserved. notice rohm customer support system http://www.rohm.com/contact/ thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. notes the information contained herein is subject to change without notice. before you use our products, please contact our sales representative and verify the latest specifica- tions : although rohm is continuously working to improve product reliability and quality, semicon- ductors can break down and malfunction due to various factors. therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. rohm shall have no responsibility for any damages arising out of the use of our poducts beyond the rating specified by rohm. examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the products. the peripheral conditions must be taken into account when designing circuits for mass production. the technical information specified herein is intended only to show the typical functions of and examples of application circuits for the products. rohm does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by rohm or any other parties. rohm shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. the products are intended for use in general electronic equipment (i.e. av/oa devices, communi- cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. the products specified in this document are not designed to be radiation tolerant. for use of our products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a rohm representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. do not use our products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. rohm shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. rohm has used reasonable care to ensur the accuracy of the information contained in this document. however, rohm does not warrants that such information is error-free, and rohm shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. please use the products in accordance with any applicable environmental laws and regulations, such as the rohs directive. for more details, including rohs compatibility, please contact a rohm sales office. rohm shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. when providing our products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the us export administration regulations and the foreign exchange and foreign trade act. this document, in part or in whole, may not be reprinted or reproduced without prior consent of rohm. 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) http://
|
